BoneHead RC carbon baja upgraded sym steering kit bonesteer
Machined from 100% genuine carbon fibre layered specially to BoneHead-RC specification for an unparalleled match on strength, reliability, and longevity.
This is the V2 bonesteer no longer need nyloc nuts on the brake and throttle servos, threaded inserts are now used also universal and will take all common servo up to 32mm wide.
Please note this is normally a made to order kit unless stated in stock the lead time is 1 week worse case.
Bonesteer has been designed and made by bonehead rc to improve steering performance and add a new level of braking to your HPI baja.
Bonesteer’s push/pull symmetrical design uses a push/pull force to improve steering performance by a large degree. The push/pull servo saver is not a new concept, it has been used incredibly successfully by large-scale cars in Europe for many years but the way it has been incorporated into bonesteer’s uniquely accessible, plug-in design using carbon fibre is a first.
The ‘race-oriented’ design is a complete steering and braking system of its type for hpi Baja that a general user can install with minimal expertise and no chassis modification.
It is designed to be used with or without front brakes. Rear brakes are now controlled by the opposite side servo than the throttle servo.
The main components are made from 100% genuine carbon fibre, this adds rigidity where it's needed most.
No more flex in the steering or braking gives maximum Servo power, a big flaw in the stock steering/brake set up is due to flex this is the ultimate upgrade you can give your steering.
It doesn’t matter if you upgrade your stock steering with alloy components, flex is in the stock design and these alloy upgrades degrade and need regular maintenance.
The stock Servo setup been off set means you don’t get a 50/50 split like the bonesteer, another downside to weak steering.
Suitable lipo pack can be found here CLICK FOR PACKS
Fitting instructions CLICK FOR INSTRUCTIONS